Private Integrated Services Network (PISN)
- Inter-Exchange Signalling Protocol - Simple Dialog Supplementary
2nd edition (December 2001)
This Standard specifies the signalling protocol for the support of the Simple Dialog supplementary service (SS-SD) at the Q reference point between Private Integrated services Network eXchanges (PINXs) connected together within a Private Integrated Services Network (PISN).
Supplementary service SD enables a user to communicate with another user or application by the exchange of keypad and display information transparently over a PISN.
The Q reference point is defined in ECMA-133.
Service specifications are produced in three stages and according to the method specified in ETS 300 387. This Standard contains the stage 3 specification for the Q reference point and satisfies the requirements identified by the stage 1 and stage 2 specifications in ECMA-310.
The signalling protocol for SS-SD operates on top of the signalling protocol for basic circuit switched call control, as specified in ECMA-143, and uses certain aspects of the generic procedures for the control of supplementary services specified in ECMA-165.
This Standard also specifies additional signalling protocol requirements for the support of interactions at the Q reference point between SS-SD and other supplementary services and ANFs.
This Standard is applicable to PINXs which can interconnect to form a PISN.
The protocol defined in this Standard forms part of the PSS1 protocol (informally known as QSIG).
The following file can be freely downloaded:
||Acrobat (r) PDF file
This Ecma publication is also approved as ISO/IEC 21408.
The previous replaced "historical" edition of this Ecma Standard is available here.